|
|
APPLICATION AND RANGE Mini-scrapers are simple pipe scrapers for use with small diameter pipe and are available in sizes 20, 25 and 32mm. They are also suitable for use on all spigot outlet fittings. Clockwise rotation of the scraper, applied with gentle forward pressure, ensures the optimum scrape is achieved.
|
|||||||||||||||||||
|
APPLICATION AND RANGE Maxi-scrapers are simple pipe scrapers for use with small diameter pipe and are available in soizes 40, 50 and 63mm. They are also suitable for use on all spigot outlet fittings. Clockwise rotation of the scraper, applied with gentle forward pressure, ensures the optimum scrape is achieved.
|
||||||||||||||||||||
|
APPLICATION AND RANGE Hand scrapers are used for scraping the pipe areas prior to electrofusion of branch saddles and tapping tees. The area for scraping should be outlined with marker pen and, with good even strokes of the scraper along the length of the pipe, an even layer of approx. 0.2mm of the surface layer should be removed. The operator should be looking for a clean even scrape of the entire area for jointing.
|
||||||||||||||||||||
|
APPLICATION AND RANGE The Universal Scraper provides a convenient means of preparing pipe ends to a consistent standard. It can operate on all pipe diameters and SDR sizes from 63mm to 315mm inclusive and will operate on coiled pipe. |
| FEATURES |
| - Correct length of scrape is pre-set |
| - Conforming to BGC PS PL2 Part 4 |
| - Fixed serrated blade driven around the pipe by a splined drive shaft |
| - Ratchet action |
| - Internal roller action holds the blade against the pipe |
| - The adjustment knob caters for the variation in wall thicknesses and pressure ratings |
| - Carry case, spare blade & cleaning brush |
| - Can also be driven by certain portable power tools - (info. on request) |
| PRODUCT CODE | UNISCRP |
| Weight | 4.5kg (inc. case) |
 |
|
MINI-SCRAPERS
