|
|
|
|
NON PRESSURE DRILL
|
| APPLICATION AND RANGE |
| The drill is for use in non-pressure applications, allowing the operator a cost effective and convenient service branch outlet to 63, 90, 110 and 125mm full bore for use on SDR 26,17 & 11 pipe. |
| FEATURES |
| - Adjustable ebbling straps |
| - Positive ratchet action |
| - Positive alignment |
| - Suitable for use on SDR 26,17 & 11 pipes up to 355mm diameter |
| - Robust construction |
| - Easy maintenance |
| - Carry case |
| - Drill retains swarf and coupon |
| DRILL | PRODUCT CODE | WEIGHT | OPERATING INSTRUCTIONS |
| Non-Pressure Drill Complete | NPLDRILL | 6kg | CS66 |
 |
|||
|
UNDER PRESSURE DRILL
|
| APPLICATION AND RANGE |
| Under pressure drilling of polyethylene is used when a new branch main is required from an existing distribution main,without disturbing customer supply downstream or incurring the use of expensive bypasses.90 and 125mm full bore for use on SDR 26,17 & 11 pipe. |
| FEATURES |
| - Minimum excavation needed |
| - No by-passes required |
| - Customer supply uninterrupted |
| - Operation should take less than 2 hours |
| - Suitable for gas or water |
| - Drill retains swarf and coupon |
| - Can be perfomed on SDR11 & 17.6 pipes |
| - Branch outlet can be either pipe, flange or valve |
| - Robust construction |
| - Carry case |
| DRILL | PRODUCT CODE | WEIGHT | OPERATING INSTRUCTIONS |
| Under Pressure Large Diameter Branch Drill Complete | UPLDDRILL | 45kg | CS96 |
|
|||
|
UNDER PRESSURE DRILL 63MM
|
| APPLICATION AND RANGE |
| This unit enables the installer to add 63mm branch connections under pressure to 90mm, 110, 125, 160 and 180mm PE mains. Required multiclamp and 20 - 63mm squeezed-off tool. |
| FEATURES |
| - Minimum excavation needed |
| - No by-passes required |
| - Customer supply uninterrupted |
| - Simple to use |
| - Robust construction and minimum maintenance |
| DRILL | PRODUCT CODE | WEIGHT | OPERATING INSTRUCTIONS |
| Under Pressure Drill 63 mm | BR63DRILL | 8kg | CS97 |
|
|||
|
FASTCUT DRILL
|
| APPLICATION AND RANGE |
| The new range of large diameter electrofusion branch saddles provides the installer with a simple alternative to the high cost of by-pass systems or the environmental costs of supply interruptions. Under -pressure drilling provides the operator with a simple,safe and cost effective method of branch installation. |
| DRILL FEATURES |
| - Modular contruction ensures ease of handling and assembly |
| - Lightweight construction |
| - Hydraulic operation of cutter head helps the operator with cutting through the pipe |
| - Can be used with plate or gate valves |
| - Dedicated cutter drive prevents penetration beyond centre line of main |
| SADDLE FEATURES |
| - Bolt on sacrificial underclamp-no additional tooling needed |
| - Minimum pressure drop due to large bore through fitting |
| - Available in PE 80 or 100 polymers in yellow, blue or black |
| - Large Electrofusion area ensures integrity of weld |
| - 39.5 volt fittings |
| - Automatically welded flange under factory conditions to ensure compliance with ISO 9002 "special proceses" |
| - Tested in accordance with industry specifications |
| SIZES AVAILABLE |
| 250mm x 200 NP16 |
| 315mm x 250 NP16 |
| 355mm x 250 NP16 |
| DRILL | PRODUCT CODE | WEIGHT | OPERATING INSTRUCTIONS |
| FASTCUT Drill | FASTCUT250 | 42kg | CS95 |
|
|||
